Charnwood DC50AUTO Extractor With Auto Start | Poolewood

Charnwood DC50AUTO Extractor with Auto Start – DC50AUTO

Charnwood DC50AUTO Extractor with Auto Start

High filtration vacuum extractor with auto start function. This is a great time saving feature. It is also perfect for using with tools which make frequent small cuts, such as a mitre saw or bandsaw.

 

Key Features

 

• Filters Down to 0.5 Microns
• Extraction starts and stops automatically
• 50 Litre Collection Capacity
• No Loss of Power with Small Diameter Hoses
• 2 Metre Length of Flexible Hose Included

 

 

This fine filter vacuum extractor is also ideal for small workshops using bench top machinery and power tools. As this machine generates a high speed of air through the hose it is therefore more suitable for reducing down to a smaller diameter hose for use with portable power tools. At the heart of the extractor is a 2 stage filter which cleans particles out of the air down to 0.5 micron. This is therefore fine enough for every machine in the workshop including sanders. The compact size and light weight, makes it particularly appealing for smaller workshops. It can also be tucked away under a bench. A quick action clamp releases the lid of the drum to empty it out.

These extractors are also a great alternative to a standard household vacuum. This is because they do not get blocked and have a larger capacity, so need emptying less often.

The extractor can be run as normal in manual mode, with a simple on/off switch.

To operate with auto start function, simply plug your power tool into the integral 3 pin plug socket and set the switch to Auto. Now, the extractor will start whenever the power tool starts. The unit will continue to run for a few seconds after the power tool is stopped. This allows it to clear any remaining dust and chips from the hose.

Supplied with 2m hose, 2 hose clamps, 3 replacement filter bags, 2m cable and plug.

Please Note : Hose is Left Hand thread so for quick connector use 100QCL