Charnwood CF1519 Cartridge Filter | Poolewood

Charnwood CF1519 Cartridge Filter

The Charnwood CF1519 Cartridge Filter upgrades your dust or chip extractor to handle the finest workshop dust.

This cartridge filter can be used to upgrade any chip extractor with a 370mm diameter collection drum. Replace the cloth filtration bag with a cartridge to increase the filtration performance down to a super fine 1 micron particle size.

This therefore, allows the extractor to be used for operations which produce very fine dust. In particular sanding and cutting MDF. The extractor can still be used with all the normal workshop machines which produce dust and chips.  Including: bandsaws, table saws, planers, thicknessers and spindle moulders.

The cartridge is also very simple to install.  Firstly, remove the cloth filter bag and support arm on the extractor.  Then fit the cartridge in its place. A metal quick action clamp secures the cartridge in place.

To ensure a long life without any deterioration in performance the filter also includes an internal cleaning device. Gently rotating the handles after each use, moves the internal paddles which therefore clean the inside of the filter and prevent clogging.

Supplied with metal fixing clamp and foam insert to ensure a good seal against the collector drum.

The Charnwood CF1519 cartridge filter is Compatible with:

Charnwood W696 Charnwood W796 Axminster AWEDE2 Any other model with a drum diameter of 370mm (15″)